(as of Nov 22,2020 16:45:41 UTC – Details)
left handed thread lag screw：10 Pcs；
right handed thread lag screw：10 Pcs；
OD drill bit：1 Piece
Wrench: 1 Piece
New deck railing design, clean and elegant, Affordable
The thread screws are designed for timber/wood post
Stainless Steel T316 material, anti-rust ,water and corrosion，marine Grade, good for indoor or outdoor usage.
This deck railing hardware fits 1/8″ OD cable of railing system
KEEP IN MIND, TURN THE LEFT AND RIGHT SCREWS IN THE SAME DIRECTION.
Quick and easy installation with our customized made wrench
TURN THE LEFT AND RIGHT SCREWS IN THE SAME DIRECTION
With Steel DM Mate wrench, your installation become much easier
The wrench is heavy duty, made of stainless steel, customized made for this project.
The pic shows a horizaontal railing
Step 1. Measure the distance for the 2 timber surface, cut the cable to
be 1-1/2 shorter than the length of the timber surface.
Step 2. Mark the hole, then drill. Our drill is #5 for wood/timber ONLY.
Step 3. Use the hydraulic crimper to fix the cable into the hand screw, usually 2 to 3 times .
Step 4. Turn the right & left woodscews thread in the same direction,
you are able to sequentially screw each side into the surfaces
without twisting the wire.
If you need angle railing hardware
If you need angle deck railing, handrail etc, please search: B07T7H3ZNY on amazon, or find it in our store.
New deck railing design, simple and elegant. This cable railing kit include 10-pcs right and 10-pcs left hand thread lag screws. SUS T316 could withstand any kind of weather.
of T316 –stainless steel，So it can be used indoor or outdoor； This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post.
It will rotate wire rope to the same direction, which resolves the problem of twisting the wire rope. Products without Left & right will bring you that hassle and might damage the cable
You can DIY to install a cable railing system .The lag screws could be drilled into wood to adjust the tightness without extra turnbuckle or tensioner.Deck and Stair Cable railing system is not only simple but also won’t block your view.
By the design of Right&left handed thread, of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed or destroyed by outsiders.